Wednesday, November 4, 2009

NEW GALLERY AND WORKSHOP


A new era for Harvey Surf is beginning. It's all signed, sealed and soon to be delivered after a six week fit-out. Harvey Surf will be open for business on the 12th December The new address is 12 PACIFIC AVE MIAMI, 50 meters from the highway lights at Miami High School.  Same friendly advice.

Until then its still the old address at Burleigh. After 2 1/2 years at Lower West Burleigh Rd, and rapidly running out of space, I am moving into a bigger factory, 3 times bigger in fact. This will give me the walls I need to hang my art, space to display a wider range of boards and have a creative studio where I can paint larger works. More space for books, sculptured pieces, and all the necessary surfing accessories. Room for exhibitions of not only my work but of other artists and events as well. An extended range of both paulownia blanks and shaped Alaia boards will be available. Shapers Workshops for both foam and Alaia surfboards in a bigger and more comfortable environment available by appointment.

A glass walled shaping bay will face onto the gallery, offering an insight into surfboards handcrafted the traditional way. There will be enough room to stand back and absorb the mood of the art and space to lay down a classic 9 foot balsa surfboard without having to worry about banging into other boards.

So for the next 6 weeks I will still be an artist and surfboard shaper but also a carpenter, painter, interior decorator and removalist, sound like hard work but the reward will be a great new gallery/workshop for all to enjoy. All part of  "LIVING THE DREAM"



Hope to see you at the gallery / workshop sometime soon.


Monday, October 26, 2009

MORE MINI SIMMONS

Lots of interest in the new Mini Simmons. so here's some more food for thought.

Perfect board for those flat summer waves, ride em all the way to the beach.

Photos of the finished board loaded soon.




Saturday, October 24, 2009

HARVEYSURF IS MOVING


With the increase in board sales and the need for more factory space as well as more wall space for bigger art exhibitions, Harveysurf is moving to a  larger site. We will still be in the Burleigh area, but as the final details have not yet been finalized I will let you all know where and when the big opening will be. The move will be early January ready for the beginning of the surf season on the Goldy. Until then I will still be in the shed creating enough boards to keep everyone happy .


There will be a bigger range of longboards, Alaia surfboards, Alaia blanks, new t-shirt designs and all the necessary accessories as well as more exhibitions. 







A new website is also being launched to coincide with the opening and the release of 16 new super models (not that type of super model, surfboards of course).


Next newsletter will have all the details and the opening night invite, so if you don't get the newsletter you can subscribe by sending an email to info@harveysurf.com with the subject heading SUBSCRIBE TO NEWSLETTER.






Mini Simmons


Bob Simmons from California was the greatest influence on modern surfboard design with several interesting concepts.
One in particular originally showing up around 1948 was a foam core timber laminated deck and rails. Round nose and wide square tail with twin double sided foiled keel fins. The bottom design, some with a small concave, was a planing hull similar to what Greenough used much later and the White Kite model from Ted Spencer.

So now this new smaller version, between 5 foot and 7 foot is a pure planing hull with an 
s-deck for buoyancy and a straight bottom line through the tail, which makes it super fast. 
 This one will be a charcoal metal flake. Will have it finished in the shop within a week or so.

Friday, October 23, 2009

Nick's old board duplicated

Nick was devastated to find his favorite old board had been broken.
But even though it was twenty years old I still had the templates and reproduced it.
Another happy camper.


Saturday, October 17, 2009

Surfboard Shapers Workshop


OVERVIEW OF THE SHAPERS WORKSHOP


Ever wanted to learn the art of shaping?

Learn the what, how, and why from a shaper with 40 years experience handcrafting all styles of boards.

Understand the tools and techniques and completely shape your own surfboard, ready for glassing, whichever style you choose.


The SHAPERS WORKSHOP offers a series of short courses comprising 5 Modules of 2 hours each designed to teach you how to shape your design directly from a blank.


MODULE OUTLINE


1: THE SHAPING BAY

The shaping bay layout with lighting, stands, racks and benches.

Tools, what they do, how to use them and how to select yours.

Understanding the custom order form

Selecting the correct blank shape, length, weight and stringers for your design

2: DESIGN

Design elements

Creating templates

Translating measurements

Cutting your plan shape


3: ROUGH SHAPING

Using the planer

Rough shaping the bottom

Rough shaping the deck

Rough shaping the rails


4: FINE TUNING YOUR DESIGN

Fine Shaping

Rail shapes

How to shape Channels and Concaves

Tucked under edges


5: FINISH SHAPING

Checking for bumps

Gauze rails

Stringer heights

Marking fin positions

Final dimensions check and ID

Shape ready for glassing

Designing logos


CERTIFICATE OF COMPETENCY ON COMPLETION

INCLUDES DESIGN FOLDER WITH STUDY NOTES AND TOOL SUGGESTIONS

TOOL PACKAGES AVAILABLE ON REQUEST.


Price varies depending on your blank choice but includes your finished shaped blank ready for glassing, All necessary protective shaping gear.

All designs long and short catered for.


contact Richard Harvey - 0414 557624 for price and available times



SOUTHCOAST FOAM used exclusively



As you can see from the Shapers Workshop Modules there is great scope for teaching a new generation of surfers the intricacy of the surfing lifestyle.


These modules can be taught as part of the Shapers Workshop Modules or can be customised to suit a variety of situations. The duration of each module is approximately 2 hours.


This unique series of Shapers Workshop Modules is being offered for the first time and will be a great addition to the education of surfers about their surfing and equipment.


The Shapers Workshop Modules range from introductory level to advanced one on one training. The modules are flexible so if you have specific needs in regards to the Workshop I can work with you to achieve the best outcome.


Course cost are an important part of the Workshop. One on one training is ideal and below are the details for this option.


For the introductory level each module is $150.00 for individuals.

If signing up for the complete 5 Shapers Workshop Modules then a discount of $50 applies and the price is $700.00 including GST. The cost of a blank, depending on the style of board, whether long or short, to be shaped must be added to the course cost. Protective equipment of goggles, ear plugs and dust mask for each participant is included in the price as is a folder with study notes and tool suggestions.


A deposit of $270 is required to book the 5 modules. This covers the cost of the first module and secures the dates for the next 4 modules. The balance which is payable as each module is completed is $130 for 3 modules and $80 for the fourth module.


A glassing service is availble where the student can come in while the board is glassed and will be given an understanding of the manufacturing techniques as the board is finished. The approximate manufacturing cost for a 6’ board is $350.00 finished to a wet and dry stage that is ready to ad art or take surfing.


These Shaper Workshop Modules are the ideal training ground to give skills that are rewarding, productive and which will lead to a great career that can be practiced worldwide.


If you would like further information on any of the Shapers Workshop Modules please don’t hesitate to contact me.


Testimonial:


dear richard,

i just wanted to say a massive thank you for having me in to do the shapers workshop, it was without a doubt the best money i have ever spent, and was the most rewarding thing i've done in a long long time.
The board that you helped me to shape has become one of, if not my favourite board in my quiver, i ride it all the time and i love telling people that i shaped it from scratch!
Everyone in the surfboard industry is so cagey and so so reluctant to give away their "secrets" so its really refreshing to have someone of your level of knowledge and experience sharing all that they know. I learnt more in 10 mins with you than i have in the last few years working in surfboard manufacturing. Not just about shaping but also about my surfing, after 15 years of surfing and learning, i feel that i finally understand my surfboards better now, how they turn around the planshape, how the rocker and bottom rails are working together the way design affects performance and thats just the tip of the iceberg!
Doing the course has helped me to take all the pieces of knowledge that i already had and put them all together with what i learnt to make it coherent and it all just "makes sense" now. My surfing has definitely improved and i feel more connected to my boards, that in itself was worth the price of the course.
As far as shaping goes since doing the course i've shaped 2 alaias, 1 bellyboard, one 5'7" quad and one 5'8" mini simmons and the quality of my shaping has improved out of sight, i will probably never buy another surfboard again, i'm even contemplating shaping my first solid wooden board from scratch, something that i found daunting for a long time!
Thank you for teaching me the tools and techniques to shape with and to create my own boards. I really feel like the sky is the limit. I can't recommend this course highly enough, for anyone regardless of skill level.

Thanks again Harvs i'll be in soon to show you my latest board. Jesse.




Link: http://blackapachesurfboards.blogspot.com


Alaia Shapers Workshop






ALAIA SHAPERS WORKSHOP
Nearly 30 enthusiastic students and a few teachers from Marymount College at Burleigh joined the wooden surfboard experience by shaping timber Alaia's as a part of their wood working class.

Girls and guys all had a go at shaping the design, with some great results.

With the plan shapes cut out, cleaned up and the rails starting to take shape, the end of the next class will see quite a few finished Alaia's hitting the water soon after.

Interest is coming from more schools, so I will keep you posted on the developments.

For those wanting paulownia timber of different dimensions and qualities for that special board including cedar stringers, it is available on request.
On a separate area with paulownia, lots of new blanks are arriving in the next few days. The stock turns over pretty quickly but I can set aside a blank.

And as a bonus for those wanted to get an Alaia surfboard, I have limited times when I will help those interested to shape their own under my guidance, all for the same price as buying one off the rack. This is a gem of a christmas pressie.

Time from start to finish including oiling and logos a little over 4 hours. Appointments are essential so please email or call for more details. Mob 0414 557624